Electric Control System
- Compared with domestic product, the electric control system is simplest, the element quantity is fewest and its reliability is highest.
- The wire remote equipment is convenient for operation far away.
- Adopting proximity switch in hydraulic cylinder can realize changing direction with non-touch, which ensures that the direction can be changed reliably.
Mechanical System
- The design of hopper and S valve and so on adopt I-DEAS software to caculate, the hopper and S valve have good rigidity to avoid the phenomenon of hopper distortion and S valve breakage.
- The agitator have unique form, which separates the hydraulic motor from agitator bearing pedestal.At the same time, adopting large displacement motor ensures that the agitator moment is big enough.
- Make sure the pumping is good and decline the phenomenon of pipe jam, the spectacles wear plate and cutting ring should be useed in lower abrasion. Xinsai's spectacles wear plate and cutting ring use high wear material, making the components' life prolonged greatly.
Lubrication System
- The hydraulic circuit will take high oil into double distributor,and then the lubricating part can obtain hydraulic oil.It ensures the lubrication of the concrete cylinder's piston and other parts and prolongs the life of piston and other sealings.
Cooling System
- The radiator equipment makes the working oil temperature of hydraulic system below 70ºC and makes the machine in normal status.
Hydraulic System
- Double open hydraulic loops (pumping hydraulic circuit is independent of distributing hydraulic circuit) with two pumps, makes the whole hydraulic system much simpler. The reliability of the whole system is also much higher as well as the components' life is prolonged greatly. This is convenient for judgeing and removing trouble.
- Large valve changing direction, makes the main pumping loop quick response, small leakage, good stability,high reliability and high resist contaminative capability.
- Hydraulic system has safe relief protection,at the same time,when the system pressure is over, the main oil pump cutting device makes itself be protected reliably.
- Distributing hydraulic circuit adopts constant pressure pump, which can provide strong distributing pressure and economic energy control.
- Cone sealing of all pipes make the pipe joints seal reliably.
- The high-low pressure switch adopting cartridge valve of reduces the trouble of dismantling and installing the oil pipe.
- Adopt emulsification technology of initiative and passivity recovery integration.
| |
Items |
LHB40-10-82R |
| Whole performance |
Max. theo. pumping capacity |
40 |
| Max. theo. mixing capacity |
22.5 |
| Max. concrete pumping pressure |
10 Mpa |
| Distribution valve type |
S Valve |
| Concrete cylinder (diameter*stroke) |
Ф180*1000 |
| Hopper capacity |
600 L |
| Outlet diameter |
Ф150 mm |
| Power System |
Diesel engine brand |
Weichai |
| Diesel engine power |
82 kw |
| Rated speed |
2200 r/min |
| Hydraulic system |
Circuit type |
Open circuit |
| Pumping system pressure |
32 Mpa |
| Mixing system pressure |
6-8 Mpa |
| Oil tank capacity |
350 L |
| Other parameters |
Max.conveying distance (vertical/level) |
100/400 m |
| Max. aggregate diameter |
40 mm |
| Inside diameter of delivering pipe |
Ф125 mm |
| Overall dimensions (L*W*H) |
3800*2200*2100 mm |
| Total weight |
5600 kg |
Name: diesel engine
Brand: Weichai
Original: China
The best diesel engine here in China. It can ensure the power supply of the concrete mixer pump.
Name: Hydraulic pump
Brand: FLUTEK Kawasaki
Original: Korea
Hydraulic pump is one of the most important parts of concrete mixer pump, because it generates hydraulic pressure to deliver concrete to the job site.
Name: Hydraulic oil pipe
Brand: Manuli
Original: Italy
The working hydraulic oil pressure is 10 Mpa, so the hydraulic oil pipes must be very good quality to sustain the very high hydraulic oil pressure.
Name: PLC
Brand: OMRON
Original: Japan
We all know the importance of PLC to a machine. Even all parts of the machine is good, but the PLC quality is poor, the machine can not work well. OMRON PLC is one of the best in the world.
Pre-sale Service
1 Answering customers' questions, helping customers choose the most suitable machines;
2.Making design drawings as per customers' requirements; 3. Providing quotations.
In-sale Service
1. Strictly control all procedures from raw materials sourcing to pre-assembly to ensure product quality;
2. Regularly updating production progress to clients;
3. After the production is completed, pre-assembly and test running will be carried out to make sure our machine works well;
4. Proper packing to minimize the risk that the machines are damaged during transportation;
5. Foundation drawing will be provided for clients to make the foundation in advance.
After-sale Service
1. Providing 7 * 24 hours online after-sales service every week
2. Providing related certificates, customs clearance documents, operation and maintenance instructions, installation videos, etc.
3. Arranging engineers to go to the client's job site. The engineers will help clients with the machine installation, machine test-running, and operators' training, etc.
4. Spare parts supply;
5. Job site visiting every year.
Audited Supplier 
){kind=link}